(4) John Deere Hydraulic Power Packs

$38,000 (USD)

orCall (855) MAKE-OIL


(4) John Deere Diesel Driven Hydraulic Power Units
Each Unit is Equipped w/ (3) Hydraulic Systems Per Power Unit
All Systems Share Common Hydraulic Fluid Stored in the Fluid Reservoir
John Deere 4045 Series Engines Set at 115hp, Can Turn Up To 170hp
In Order To Run All (3) Hydraulic Systems Simultaneously at the Rated Flows & Pressure Described Below, the Power Requirement is About 85hp
Equipped w/ Spark Arrestor Mufflers & Safety Shut Down Systems
Systems 1 & 2
(2) Systems Were Set Up to Provide 26 gpm (At Rated Engine Speed), at Maximum Operating Pressure of 2000psi
The Pump On Each of These Systems is Variable Displacement, Presure Compensated, Adjustable Volume & Pressure
Each System Has a Solenoid Vented Relief Valve That Will Dump System Flow To Tank When the Valve Coil is De-Energized
System 3
(1) System was Set Up To Provide 26 gpm (At Rated Engine Speed) At a Maximum Operating Pressure of 4000psi
The Pump On Each Of These Systems is Variable Displacement, Pressure Compensated, Adjustable Volume & Pressure
This Pump Provides Fluid To a Four Station Manifold. Each Station Contains a Solenoid Operated Four Way, Three Position Directional Control Valve
(2) Of the Valves are Each FLow Limited To 13 gpm
Other (2) Valves are Each Flow Limited to 16 gpm
All Located in Louisiana
For more info, email Sagan@repforcesales.com or call (855)MAKE-OIL now.


Stock NumberCT014
Stock noCT014